Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Accelerator Pedal of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accelerator

See other generations:
Video tutorial

These brief and simple instructions will show you how to remove and replace the accelerator pedal of the BMW 3 Series. First, open the driver's side front door and start unscrewing the mounting screw of the pedal located at the bottom; then disconnect the electrical connector found at the back by pressing on the tab and pulling, as shown in the video.

At this point, remove and replace the pedal with the new one, as well as with the original; secure it properly and reconnect it by applying the reverse procedure!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Removing the Accelerator Pedal of the BMW 3 Series E46
Removing the Accelerator Pedal of the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) .. In this video, you will see instructions on how to remove and replace the accelerator pedal of the BMW 3 Series E46. First, get in the vehicle and.. …
How to Reset the Adaptive Transmission in the BMW 3 Series?
How to Reset the Adaptive Transmission in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, we will see how to reset the adaptive automatic transmission in the BMW 3 Series, a very simple operation to perform, for example, …
Instructions for Disassembling the Accelerator Pedal
Instructions for Disassembling the Accelerator Pedal
BMW Serie 3 (1998-2006 / E46) Before proceeding with the disassembly of the accelerator pedal, disconnect the connector attached to the potentiometer instead of cutting the wire a…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos