Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear glass seal of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010

Today we will see the necessary information to disassemble and replace the rear window seal of the BMW 5 Series. First of all, we open the rear hatch of the trunk and start removing the seal found on the lower part; then we use something thin to gently detach the rear window seal, pulling it up at one end until it is completely removed, as shown in the video. At this point, we clean the base perfectly from any remaining dirt, then apply the new seal; make sure it is perfectly inserted, verifying the correct closure of the trunk hatch.

Posted on 27 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Window Seal on the BMW 5 Series
Replacing the Rear Window Seal on the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will see the steps to remove and replace the rear window seal on the BMW 5 Series. First, move to the back of the vehicle…
Guide to replacing the side glass of the BMW 5 Series
Guide to replacing the side glass of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this guide, we will see the necessary information to disassemble and replace the side glass and window regulator mechanism of the BMW 5 Series. Fi…
Replacing the Window Regulator Mechanism on the BMW 5 Series
Replacing the Window Regulator Mechanism on the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) This guide briefly outlines the instructions for removing and replacing the window regulator mechanism on the BMW 5 Series. First, open the front doo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos