Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Side Glass from the BMW 5 Series Door

Model: BMW Serie 5 E34 - Years 1988-1995
Part: Side window

In today's video, you will see the steps to remove and replace the side glass from the BMW 5 Series door, following the instructions below. First, open the front door of your car and start removing the door panel by unscrewing all the screws; then remove the side glass seal, as shown in the video. At this point, unscrew the glass from the bracket and lift it out of the door; then install the new side glass, checking the electrical operation of the window!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the side glass of the BMW 5 Series
Guide to replacing the side glass of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this guide, we will see the necessary information to disassemble and replace the side glass and window regulator mechanism of the BMW 5 Series. Fi…
How to Remove the Window Regulator Mechanism from the BMW 5 Series
How to Remove the Window Regulator Mechanism from the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this short and simple guide, you will learn how to remove and replace the window regulator mechanism of the BMW 5 Series. First, open the front or…
Replacing the Window Regulator Mechanism on the BMW 5 Series
Replacing the Window Regulator Mechanism on the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) This guide briefly outlines the instructions for removing and replacing the window regulator mechanism on the BMW 5 Series. First, open the front doo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos