Do it yourself
Frequently asked questions about cars and motorcycles

Door Panel Removal Instructions

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Door trim panel

Removing the door panel is very simple and requires the removal of only two screws: one is located under the plastic cap labeled SRS AIRBAG and the other at the front of the panel, also protected by a small cap. Once these two screws are removed, pry along the edges of the panel to release the plastic clips and pull it away enough from its position to have enough maneuvering space to remove the lock rod and disconnect the various connectors and the lock release cable. Then reverse the process for reassembly.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2003-2010 / E61, E60) Remove the door panel if it is damaged or if you need to repair the door. Let's go through the panel removal process. Remove all the small screw cove…
BMW Serie 5 (1995-2003 / E39) Before proceeding with the removal of the front fender, it is advisable to protect the front edge of the door and the rocker panel with masking tape …
BMW Serie 5 (1995-2003 / E39) To completely remove the door, it is necessary to pull out the hinge pins, the rod pin, and especially disconnect the wiring harness connector. This …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos