Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on BMW 5 Series F10 - F11

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Door trim panel

In this video, see how to remove the front door panel on a BMW 5 Series F10 and F11 by following the instructions below. First, open the front door and remove the upper trim by prying it off with something thin. Next, take off the cover of the door handle and remove the Torx screw located underneath, as shown in the video. At this point, remove the additional Torx screws found on the door panel and start prying it off from the sides to release it. Finally, disconnect the door handle cable and the power window connector to remove the panel.

Updated on 11 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
Where to Find the Fuse Box of the BMW 5 Series F10
Where to Find the Fuse Box of the BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) In this mini guide dedicated to your BMW 5 Series F10 (2010-2017), discover where all the various fuses are located in the vehicle. First, park your …
What is the fuse diagram for the BMW 5 Series?
What is the fuse diagram for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) .. The fuse diagram for the BMW 5 Series F10 and F11 is detailed in the owner's manual. If this is lost, refer to the diagram shown in the attached video... …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos