Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the BMW 5 Series F10

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight

If you want to disassemble one of the front headlights of your BMW 5 Series F10 by yourself, you just need to follow the steps described in our new guide. First, park the car on a flat surface, then engage the parking brake and turn off the engine. Once these simple operations are completed, you can go outside and lift the front hood. Then, unscrew all the screws located above the headlight and pull it towards you. Finally, disconnect the various electrical cables and complete the headlight disassembly operation.

Posted on 9 April 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove Condensation from the Front Headlight of BMW 5 Series
How to Remove Condensation from the Front Headlight of BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see the instructions that will allow you to disassemble the front headlight and remove any condensation from the BMW 5 Series. First,…
Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see step-by-step instructions to remove and replace the xenon headlight bulb on the BMW 5 Series. To access the headlight bulb, raise…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos