Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the emergency call battery of the BMW X6?

Model: BMW X6 MK 2, F16 - Years 2014-2019
Part: Battery

In order to replace the battery that regulates the BMW X6's emergency call system, the rear seats must be folded down and the rear door pillar covers removed. At this point, when opening the tailgate of the luggage compartment, it will be necessary to loosen the bolts that secure the roof cover and remove it by levering with an object. Once the roof cover has been moved, you will be able to access the TCM battery, which regulates the operation of the emergency call system. This can be removed and replaced with a new spare part.

Posted on 1 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery in BMW X6
How to replace the key battery in BMW X6
BMW X6 (2014-2019 / MK 2, F16) If the smart key of your BMW X6 second series (year 2014-2019) suddenly stopped working due to a completely dead battery, don't worry because below w…
How to replace the battery in the remote control of the BMW X6 F16.
How to replace the battery in the remote control of the BMW X6 F16.
BMW X6 (2014-2019 / MK 2, F16) Thanks to the few simple steps described in the following guide, you will be able to independently replace the battery located inside the remote cont…
How do you replace the battery of the BMW X6?
How do you replace the battery of the BMW X6?
BMW X6 (2007-2014 / E71, MK 1) To replace the battery installed on the BMW X6, you need to open the rear hatch so that you can detach the panel covering the bottom left. This way y…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos