Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Service warning light

In this video tutorial, you will learn how to reset the maintenance light on a BMW X3, model produced from 2010 to 2017. Start by getting in the car and turning on the ignition without starting the engine. Now press and hold the S/R button located at the bottom left of the speedometer until the display shows "OILSERVICE". At this point, release the button and press it again to confirm the reset. You need to repeat this operation one last time until the reset is complete. Now you can turn off and restart the vehicle to verify that the reset was successful.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a BMW X3
How to Reset the Service Light on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) .. Learn how to reset the service light on a BMW X3. To reset the maintenance light: turn on the vehicle's ignition,.. …
How to reset the Service light on the BMW 3 Series?
How to reset the Service light on the BMW 3 Series?
BMW X3 (2003-2010 / MK 1, E83) To reset the Service light on the BMW 3 Series, press and hold the button located on the left side of the instrument cluster, just below the tachomet…
How to Reset the Service Light on a BMW X3 F25
How to Reset the Service Light on a BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) In this new guide dedicated to your BMW X3 F25 (2010-2017), you will learn the steps to manually reset the maintenance light that turns on every time…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos