Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on the BMW 3 Series?

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Service warning light

To reset the Service light on the BMW 3 Series, press and hold the button located on the left side of the instrument cluster, just below the tachometer. While holding it, insert the ignition key into the ignition switch and turn it to the on position. After a moment, you will see that the light will be correctly reset and the maintenance interval will be restored. To verify that everything has been done correctly, turn off and then turn on the instrument cluster.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X3 (2003-2010 / MK 1, E83) To reset the brake light on a BMW X3 (this procedure also applies to the 3 Series, 5 Series, and X5), first ensure that the brake pads have been repl…
BMW X3 (2017-2024 / MK 3, G01) To reset the "Service" light on a BMW X3, turn on the instrument panel without starting the engine. Use the controls on the steering wheel to navigat…
BMW X3 (2010-2017 / MK 2, F25) To reset the service light on a BMW X3, turn on the ignition with the appropriate button and then press and hold the button on the left side of the i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos