Do it yourself
Frequently asked questions about cars and motorcycles

BMW 3 Series Fuse Diagram

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

This model from the German manufacturer has 3 fuse boxes. The first is located in the cabin on the right side just below the passenger glove compartment, while the second box is also on the right side inside the engine compartment, and the third box is located in the rear trunk on the right side. To access it, you need to remove the side panel of the trunk. The assignment of the fuses is present in the summary diagram found behind the covers of each fuse box and is also obviously included in the vehicle's owner's manual.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
BMW Serie 3 (2005-2013 / E91, E90, E92) The attached video shows the diagram and location of the fuses in our BMW 3 Series. Fuses are designed to prevent damage to the vehicle's electrical …
BMW Serie 3 (1998-2006 / E46) In this video, we can see the fuse diagram for the BMW 3 Series E46, useful in case we need to check the fuse for a malfunctioning device. As we can …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos