Do it yourself
Frequently asked questions about cars and motorcycles

Securing Underpanel with Butyl Tape

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

When you remove the door panel, there is a sound-absorbing cover underneath it made of plastic or sponge material, secured with a very sticky adhesive: it is butyl tape, composed of a highly adhesive compound reinforced with a polyester mesh. Generally, if you take care when peeling off this cover, you can reposition it without removing this tape.

Otherwise, you can remove the adhesive from the door by heating it and prying it off with a spatula, then clean the surface with solvent or degreaser. Next, apply new tape along the edge of the cover to stick it to the door.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) Remove the volume control knob and locate the hole to insert the key to release the retaining spring by turning it: once released, disconnect the dis…
BMW Serie 5 (1995-2003 / E39) Lower the window of the door and unscrew the screw located in the opening handle area. Unscrew the screw located in the side tunnel. Using a plastic …
BMW Serie 5 (1995-2003 / E39) This guide shows how to remove chrome trim from your car. Start by locating a corner to begin the removal. Carefully loosen it and use a flathead scr…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos