Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing AUX IN Adapter for iPod

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Accessory kit

See other generations:
Video tutorial

Remove the volume control knob and locate the hole to insert the key to release the retaining spring by turning it: once released, disconnect the display connector. Then, remove the other two screws securing the tape player (near the two golden pins) and pull it out of its housing by disconnecting the corresponding connector.

Connect the original wiring harness connector to the GTA kit wiring harness and the other end to the car stereo. Release the climate control buttons, remove the cup holder supports, the trim around the gear shift, the parking light button (and the screw underneath), and the air vents behind the tunnel.

Remove the central tunnel trim and route the GTA kit cables to bring the Aux output to the glove compartment area of the central tunnel.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Installing AUX/USB Cable on Factory Radio
Installing AUX/USB Cable on Factory Radio
BMW Serie 5 (2003-2010 / E60, E61) This video shows how to install the AUX/USB cable on a factory radio. First, obtain the correct cable compatible with your radio and connect it via U…
Guide to Installing a Xenon Kit
Guide to Installing a Xenon Kit
BMW Serie 5 (1995-2003 / E39) This guide shows how to install a xenon kit without causing damage. Ensure that the bulbs do not break or scratch during installation. Do not touch t…
Auxiliary Power Adapter
Auxiliary Power Adapter
BMW Serie 5 (1995-2003 / E39) The auxiliary power adapter allows you to power a wide range of electronic devices. It plugs into the portable flashlight socket located in the glove…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos