Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire indicator in the BMW 3 Series?

Model: BMW Serie 3 G20 - Years 2019-2026
Part:

In this tutorial, we can see how to reset the tire warning light in the BMW 3 Series, a very simple and quick operation. Before proceeding, make sure to restore the correct tire pressure for each tire following the instructions in the manual. Let's start by turning on the instrument panel, then using the knob located in the center console, go to the "CAR" section and select "Vehicle status". Next, go to the "Tyre Pressure Monitor" section, enter "Tyre settings" and perform the reset using the "Perform reset" option. Finally, restart the instrument panel.

Posted on 28 January 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the recommended pressure value: this val…
How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To completely remove the tire pressure monitoring system warning light from the BMW 3 Series instrument panel, you will first need to adjust all the …
How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the correct pressure value: this value i…

How to Replace the Front Headlight Bulbs on an Opel Mokka

Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the rubber inspection cap on the back of the headlight and remove it. Disconnect the bulb holder from the headlight and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs (always ensure they are the correct type and size) and insert the bulb holder back into the headlight housing. Reassemble all previously removed parts (headlight cover cap).

Watch the video!


by ScegliAuto

More videos