Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part:

To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the correct pressure value: this value is indicated on the sticker that is attached to the driver's side door pillar. After the tires have been inflated, you can turn on the instrument panel and navigate through the menu that will be displayed on it: you will need to use the lever on the left side of the steering wheel and when the tire icon appears, you will need to hold down the BC button on the same lever to make it disappear.

Posted on 7 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the recommended pressure value: this val…
Resetting the tire pressure warning light on the BMW 3 Series.
Resetting the tire pressure warning light on the BMW 3 Series.
BMW Serie 3 (2005-2013 / E91, E90, E92) The instructions in this guide will allow us to reset the tire pressure warning of the BMW 3 Series; before resetting the TPMS sensors, it is necessa…
How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To completely remove the tire pressure monitoring system warning light from the BMW 3 Series instrument panel, you will first need to adjust all the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos