Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Emblem Replacement

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Manufacturer emblem

This is a simple procedure that does not require special tools; in fact, you can perform this maintenance with just a basic rewards card. For your convenience, open the trunk and work while standing upright. Take the card and use it to pry up the old emblem. To install the new emblem, assemble the three parts and start by placing the adhesive ring behind the emblem. Then, position the emblem with the two pins in the two holes and apply pressure, even giving it a few taps. Now, you can also glue the outer part of the emblem, ensuring it is centered as much as possible.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Glass of the Side Mirror on a BMW 3 Series
Replacing the Glass of the Side Mirror on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Here are the instructions to remove and replace the glass of the side mirror on a BMW 3 Series. First, move to the outside of the vehicle and gently …
Replacement of the external rearview mirror of the BMW 3 Series
Replacement of the external rearview mirror of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) These short and simple steps will show us how to disassemble and replace the external rearview mirror of the BMW 3 Series. First of all, we open the …
How to Remove and Install the Rear Window Seal on a BMW 3 Series
How to Remove and Install the Rear Window Seal on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove and install the rear window seal on a BMW 3 Series? Don't worry, let's see together in this video how to proceed. Start the removal: ta…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos