Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lambda Sensor on a BMW 7 Series

Model: BMW Serie 7 E68, MK 4, E67, E65, E66 - Years 2001-2008
Part: Oxygen sensor

In this video, learn how to replace the lambda sensor on a BMW 7 Series. Lift the car using a column lift or jack, secure it at a comfortable working height, and ensure it is stable. Remove the plastic engine cover panel with a screwdriver, disconnect the power connector from the lambda sensor, and unscrew the sensor using a suitable wrench. Once you have removed the sensor from its housing, compare it with the new part. Install the new sensor with the appropriate wrench and reconnect the power connector. Finally, reinstall the soundproofing engine cover.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Check Lambda Sensor Functionality
Check Lambda Sensor Functionality
BMW Serie 7 (2001-2008 / E68, MK 4, E67, E65, E66) The oxygen sensor, commonly known as the lambda sensor, detects the concentration of oxygen in the exhaust gases to maintain the air-fuel ratio (kg a…
How to replace the external rearview mirror of the BMW 7 Series
How to replace the external rearview mirror of the BMW 7 Series
BMW Serie 7 (2008-2015 / F02, F01, MK 5) In this guide we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the BMW 7 Series. First, we …
How to remove the external rearview mirror of the BMW 7 Series
How to remove the external rearview mirror of the BMW 7 Series
BMW Serie 7 (1994-2001 / E38, MK 3) Today's information will show us how to disassemble and replace the external rearview mirror of the BMW 7 Series, in simple steps. First, we open the…

How to Remove the Tailgate Handle on a Nissan Qashqai

Follow these steps to remove the tailgate handle on a Nissan Qashqai to replace the number plate bulbs. First, open the rear tailgate of the car, then unscrew the screws on the plastic trim of the tailgate using a screwdriver (remove the plastic rivets). Detach the plastic trim from the tailgate, unscrew the securing bolts of the external handle with a screwdriver. Finally, remove the tailgate handle by hand. Take the new part and disassemble the number plate light. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos