Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : Speaker

BMW X5 - Speaker

Speaker BMW X5 (1999-2006 / e 53)

BMW X5 (1999-2006 / E53)
Replacing Speaker in BMW X5 E53
Follow these simple steps to remove and replace the speaker in a first-generation BMW X5 E53. First, open the front door and remove the door panel by taking …Read all…
Posted on 4 May 2026 by ScegliAuto
Cigarette lighter (3) Alternator (2) Speaker (1) Shocks (3) Car stereo (9) Battery (5) Air vents (2) Transmission (4) Spark plugs (2) Body (7) Glove compartment (2) Key (23) Timing belt (3) V-belt (2) A/C controls (2) Onboard computer (1) Checks and maintenance (15) Dashboard (2) Brake rotors (3) Rear bench seat (2) Headlight (7) Air filter (4) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Parking brake (2) Clutch (2) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (5) Light bulb (2) Headlight bulb (8) Interior dome light bulb (4) License plate light (3) Handle (6) Trim cover (2) Power window motor (3) Transmission fluid (2) Engine oil (2) Clock (2) Door trim panel (6) Front bumper (3) Rear bumper (1) Tires (1) Shift knob (1) Fuel pump (1) Push button (2) Fuse box (39) Seat (4) Parking sensors (1) Door lock (1) Suspension system (2) Side mirror (3) AdBlue warning light (11) Warning light – error code (14) (10) Tire pressure warning light (2) Service warning light (38) Manufacturer emblem (2) Fuel cap (5) Windshield wipers (2) Drivetrain (2) Center console tunnel (2) Blower motor (6) Side window (2) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos