Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : Shocks

BMW X5 - Shocks

Shocks BMW X5 (1999-2006 / e 53)

BMW X5 (1999-2006 / E53)
How to Change Front Springs
To change the front springs of a car, remove the wheel bolts using a power tool or a standard wrench. Next, use a 19mm wrench and a 5mm socket to remove the …Read all…
Posted on 8 March 2026 by ScegliAuto
BMW X5 (1999-2006 / E53)
Replacing Car Shock Absorbers
If your car has traveled more than one hundred thousand miles, you need to replace the shock absorbers. They serve to dampen the vehicle's bumps and increase …Read all…
Posted on 5 March 2026 by ScegliAuto
BMW X5 (1999-2006 / E53)
Rear Shock Absorber Replacement
Replacing the rear shock absorber is much simpler than the front ones since the spring and the damper are separate; essentially, lift the vehicle on a lift, …Read all…
Posted on 1 March 2026 by ScegliAuto
Cigarette lighter (3) Alternator (2) Speaker (1) Shocks (3) Car stereo (9) Battery (5) Air vents (2) Transmission (4) Spark plugs (2) Body (7) Glove compartment (2) Key (23) Timing belt (3) V-belt (2) A/C controls (2) Onboard computer (1) Checks and maintenance (16) Dashboard (2) Brake rotors (3) Rear bench seat (2) Headlight (7) Air filter (4) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Parking brake (2) Clutch (2) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (5) Light bulb (2) Headlight bulb (8) Interior dome light bulb (4) License plate light (3) Handle (6) Trim cover (2) Power window motor (3) Transmission fluid (2) Engine oil (2) Clock (2) Door trim panel (6) Front bumper (3) Rear bumper (1) Tires (1) Shift knob (1) Fuel pump (1) Push button (2) Fuse box (40) Seat (4) Parking sensors (1) Door lock (1) Suspension system (2) Side mirror (3) AdBlue warning light (11) Warning light – error code (15) Tire pressure warning light (12) Service warning light (40) Manufacturer emblem (2) Fuel cap (5) Windshield wipers (2) Drivetrain (2) Center console tunnel (2) Blower motor (6) Side window (2) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos