Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : Replacement of car shock absorbers

BMW X5 - Video tutorial

Model: BMW X5 E53 - Years 1999-2006
Part: Shock absorbers
Operation: Replacement of car shock absorbers

In the event that our car has traveled more than one hundred thousand kilometers, we need to replace the shock absorbers. The latter have the function of cushioning the jolts of the vehicle and increasing its safety while facing a curve. This is a procedure that you can do even without using your trusted mechanic. We raise one side of the car and with the jack remove the wheel. At this point, we will have to open the hood by operating the appropriate lever and remove all four screws that are positioned above the shock absorber. Subsequently, we also remove the two screws located on the axle shaft and in addition the one placed on the stabilizer which is parallel to the shock absorber. The shock will come off on its own like this.


Posted on 15 September 2023 by ScegliAuto



Rear shock absorber replacement
BMW X5 (1999-2006 / E53) Replacing the rear shock absorber is much easier to carry out than the front ones since the spring and the damper are separate; it basically involves
How to change the front springs
BMW X5 (1999-2006 / E53) To change the front springs of a car you have to unscrew the wheel bolts possibly with a gun or with a wrench provided. Then, with a 19 mm wrench and
Guide to removing the sunroof of the car
BMW X5 (1999-2006 / E53) If the sunroof of our car needs to be replaced a metal replacement cap must be installed. With a little care, anyone can remove a sunroof without dam

    Frequently Asked Questions

    • X5 1999-2006 - What is the problem with the BMW X5 self-levelling suspension? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos