Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. X5
  6. : Alternator

BMW X5 - Alternator

Alternator BMW X5 (1999-2006 / e 53)

BMW X5 (1999-2006 / E53)
Alternator Disassembly Instructions

To disassemble the alternator, first remove the engine air filter box (airbox): disconnect the mass air flow sensor connector, remove the air filter box cover, …Read all…
Posted on 26 February 2026 by ScegliAuto
BMW X5 (1999-2006 / E53)
Instructions for Removing the Alternator

Before removing the auxiliary belt, it is suggested to take a photo or note the routing of the belt around the various pulleys. Once the auxiliary belt is …Read all…
Posted on 20 February 2026 by ScegliAuto

Cigarette lighter (3) Alternator (2) Speaker (1) Shocks (3) Car stereo (9) Battery (5) Air vents (2) Transmission (4) Spark plugs (2) Body (7) Glove compartment (2) Key (23) Timing belt (3) V-belt (2) A/C controls (2) Onboard computer (1) Checks and maintenance (15) Dashboard (2) Brake rotors (3) Rear bench seat (2) Headlight (7) Air filter (4) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Parking brake (2) Clutch (2) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (5) Light bulb (2) Headlight bulb (8) Interior dome light bulb (4) License plate light (3) Handle (6) Trim cover (2) Power window motor (3) Transmission fluid (2) Engine oil (2) Clock (2) Door trim panel (6) Front bumper (3) Rear bumper (1) Tires (1) Shift knob (1) Fuel pump (1) Push button (2) Fuse box (39) Seat (4) Parking sensors (1) Door lock (1) Suspension system (2) Side mirror (3) AdBlue warning light (11) Warning light – error code (14) (10) Tire pressure warning light (2) Service warning light (38) Manufacturer emblem (2) Fuel cap (5) Windshield wipers (2) Drivetrain (2) Center console tunnel (2) Blower motor (6) Side window (2) Steering wheel (2)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos