Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : Fuel pump

BMW X5 - Fuel pump

Fuel Pump BMW X5 (1999-2006 / e 53)

BMW X5 (1999-2006 / E53)
How to Replace the Fuel Pump on a BMW X5
How to replace the fuel pump on a BMW X5? First, disconnect the battery cables. Then, remove the rear seat cushions (the pump is underneath). Use a socket …Read all…
Posted on 31 March 2026 by ScegliAuto
Cigarette lighter (3) Alternator (2) Speaker (1) Shocks (3) Car stereo (9) Battery (5) Air vents (2) Transmission (4) Spark plugs (2) Body (7) Glove compartment (2) Key (23) Timing belt (3) V-belt (2) A/C controls (2) Onboard computer (1) Checks and maintenance (16) Dashboard (2) Brake rotors (3) Rear bench seat (2) Headlight (7) Air filter (4) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Parking brake (2) Clutch (2) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (5) Light bulb (2) Headlight bulb (8) Interior dome light bulb (4) License plate light (3) Handle (6) Trim cover (2) Power window motor (3) Transmission fluid (2) Engine oil (2) Clock (2) Door trim panel (6) Front bumper (3) Rear bumper (1) Tires (1) Shift knob (1) Fuel pump (1) Push button (2) Fuse box (40) Seat (4) Parking sensors (1) Door lock (1) Suspension system (2) Side mirror (3) AdBlue warning light (11) Warning light – error code (15) Tire pressure warning light (12) Service warning light (40) Manufacturer emblem (2) Fuel cap (5) Windshield wipers (2) Drivetrain (2) Center console tunnel (2) Blower motor (6) Side window (2) Steering wheel (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos