Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Regal
    4. : 2018-2023 (MK 6)

Buick Regal Years 2018-2023 (MK 6)

Buick Regal (2018-2023 / MK 6)
How to install carbon fiber door handle covers on a Buick Regal.
These handle covers to be installed on the Buick Regal significantly change the appearance of the car. On the car in the video, it is noticeable, but even more …read all…
Posted on 31 May 2023 by ScegliAuto
Buick Regal (2018-2023 / MK 6)
How to replace the battery in the key of a Buick Regal.
To replace the remote key's battery on this car model, in the following description we can find advice and instructions on how to do it. Firstly, it's …read all…
Posted on 20 April 2023 by ScegliAuto
Buick Regal (2018-2023 / MK 6)
How to reset the engine oil service light on a Buick Regal
In this short video tutorial we are told how to reset the engine oil change service light in a Buick Regal car. The operation is short and requires a few …read all…
Posted on 27 May 2023 by ScegliAuto
Buick Regal (2018-2023 / MK 6)
Where is the 2019 Buick Regal fuse box located
Two different fuse boxes are installed inside your 2019 Buick Regal, and each is located in a different location. In fact, to find the first box (the main one) …read all…
Posted on 5 August 2022 by ScegliAuto
Buick Regal (2018-2023 / MK 6)
How to replace the gear knob of the Buick Regal
In today's video tutorial we will see the steps on how to disassemble and replace the gear knob of the Buick Regal. First of all we get on board the car and …read all…
Posted on 8 June 2022 by ScegliAuto
Buick Regal (2018-2023 / MK 6)
How to change the gear knob on a Buick Regal
How to replace the gear knob on the Buick Regal. The gearshift gaiter can be removed very easily because it is pressurized. A small metal gasket will have to …read all…
Posted on 5 June 2022 by ScegliAuto
Bodywork (1) Key (4) -board computer (1) Checks and maintenance (2) Headlight (1) Cabin air filter (3) Accessory Kit (1) Headlight bulb (1) Rear light bulb (1) Door panel (1) Gear Shift Knob (3) Instrument cluster (1) Fuse box (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos