Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear windshield wiper of the Buick Encore

Model: Buick Encore MK 1 - Years 2013-2022
Part: Windshield wipers

Today we will discover the instructions that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Buick Encore. First of all, let's move to the rear of the car and start removing the plastic cover above the wiper arm; then unclip the plastic clip of the wiper blade, in order to remove it, as shown in the video. Install the new rear windshield wiper, of the right type and with the same dimensions, fixing it in the correct direction; all that's left is to finally reassemble the plastic cover of the wiper blade!

Posted on 17 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear shift knob of the Buick Encore
Buick Encore (2013-2022 / MK 1) In this new guide dedicated to all of you who own a Buick Encore first edition, we will describe the various steps you need to follow if you want to …
Where to Find the OBD2 Port on a Buick Encore
Where to Find the OBD2 Port on a Buick Encore
Buick Encore (2013-2022 / MK 1) Finding the OBD2 port on your first-generation Buick Encore is very simple, and you can do it without any issues by following the brief procedure des…
How to Remove the Rear Bumper on a Buick Encore?
How to Remove the Rear Bumper on a Buick Encore?
Buick Encore (2013-2022 / MK 1) As seen in this tutorial, removing the rear bumper on a Buick Encore is an extremely simple and quick task. First, open the trunk. Then, remove the t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos