Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Buick Verano automatic gear knob

Model: Buick Verano MK 1 - Years 2010-2017
Part: Shift knob

Let's find out in this guide how to remove and replace the Buick Verano automatic gear knob, in simple and quick steps. First we get on board the car and begin to unclip the plastic cover that we find on the base of the gear lever, levering the sides with something thin; then we go to detach the clamp that we find between the cap and the knob in order to pull the latter upwards to remove it and replace it with the new one, as shown in the video. Now let's reassemble everything, applying the reverse procedure of the disassembly!

Posted on 24 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the shift knob of a Buick Verano?
How do you replace the shift knob of a Buick Verano?
Buick Verano (2010-2017 / MK 1) To replace the gear shift knob of the Buick Verano, you need to use an object to pry off the plastic cover located at the base of the gear shift leve…
How to replace the gear shift knob of the 2014 Buick Verano
How to replace the gear shift knob of the 2014 Buick Verano
Buick Verano (2010-2017 / MK 1) If the gear shift knob of your 2014 Buick Verano is now too old and shows signs of wear, then it's time to replace it. Below we will find out how to …
How to reset the service light on the Buick Verano.
How to reset the service light on the Buick Verano.
Buick Verano (2010-2017 / MK 1) In this video, we will see how to reset the service in the Buick Verano. First, we insert the keys into the ignition and start the car. We press the …

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos