Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I remove the Buick Envision steering wheel airbag?

Model: Buick Envision MK 2 - Years 2016-2023
Part: Airbag

In order to remove the airbag from the Buick Envision steering wheel, you need to loosen the two screws located at the rear of the steering wheel: these can be reached by turning the steering wheel first to the right and then to the left. Once these two screws have been loosened, it will be possible to remove the airbag from inside its housing by disconnecting the connectors at the rear. The new airbag must therefore be connected to them, so that it can then be inserted in the center of the steering wheel; it will finally be fixed by screwing the screws into the rear part of the steering wheel.

Posted on 6 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Buick Envision 2
Where to Find the Fuse Box of the Buick Envision 2
Buick Envision (2016-2023 / MK 2) If you want to find the fuse box of your second-generation Buick Envision in seconds, just read the following guide and follow the steps. Start by op…
How to reset the oil service in Buick Envision?
How to reset the oil service in Buick Envision?
Buick Envision (2016-2023 / MK 2) As we can see in this tutorial, resetting the oil service in the Buick Envision is a very simple operation. Before proceeding, let's make sure that y…
How to reset the oil service in the Buick Envision?
How to reset the oil service in the Buick Envision?
Buick Envision (2016-2023 / MK 2) In this tutorial we can see how to reset the oil service in the Buick Envision, an extremely simple and fast operation, to be carried out only after …

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos