Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Tavera - Pump

Chevrolet Tavera (2001-2017 / MK 1)
How do you replace the water pump on your Chevrolet Tavera?
Replacing the water pump on the Chevrolet Tavera is done by opening the hood, so that you have access to the components inside the engine compartment. In the …read all…
Posted on 17 November 2022 by ScegliAuto
Chevrolet Tavera (2001-2017 / MK 1)
How do you replace the Chevrolet Tavera water pump?
In order to replace the Chevrolet Tavera water pump you will need to open the hood, so that you have access to the components on the left side of the engine …read all…
Posted on 14 May 2024 by ScegliAuto
Battery (1) Bodywork (1) Timing belt (1) Headlight (1) Air filter (1) Antifreeze liquid (1) Dashboard light (1) Gear oil (1) Engine oil (2) Pump (2) Wheel (1) Drums and shoes (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos