Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump in a Chevrolet Tavera?

Model: Chevrolet Tavera MK 1 - Years 2001-2017
Part: Pump

To replace the water pump in a Chevrolet Tavera, open the hood to access the components inside the engine compartment. At the front of the engine block, you will find the timing belt around the respective pulleys: loosen the bolts securing the water pump pulley and completely remove it. This will allow access to the water pump, which must also be freed from its mounting bolts and replaced with a new part; after replacement, reinstall all previously removed components.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Chevrolet Tavera?
How to Replace the Water Pump on a Chevrolet Tavera?
Chevrolet Tavera (2001-2017 / MK 1) To replace the water pump on a Chevrolet Tavera, open the hood to access the components on the left side of the engine block. Here, you will find the…
How to Change the Engine Oil on a Chevrolet Tavera?
How to Change the Engine Oil on a Chevrolet Tavera?
Chevrolet Tavera (2001-2017 / MK 1) To change the engine oil on a Chevrolet Tavera, access the underside of the engine compartment where the oil drain plug is located. This will allow y…
How to Restore the Chevrolet Logo on a Chevrolet Tavera
How to Restore the Chevrolet Logo on a Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) If your Chevrolet Tavera has a faded and damaged Chevrolet logo, check out this video to restore it. First, gently remove it from the body using a sm…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos