Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore the Chevrolet Logo on a Chevrolet Tavera

Model: Chevrolet Tavera MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Body

Video tutorial

If your Chevrolet Tavera has a faded and damaged Chevrolet logo, check out this video to restore it. First, gently remove it from the body using a small screwdriver. Use a thin tip to take off the clear plastic cover from the logo.

Clean both pieces thoroughly and scrape off the clumped paint from both parts. Sand well and polish the painted area as best as you can until it shines again.

Reattach the clear cover securely, and at this point, you are ready to reattach the logo to the vehicle's body using a two-part adhesive.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission Fluid in a Chevrolet Tavera
How to Replace the Transmission Fluid in a Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) This guide provides the necessary instructions to replace the transmission fluid in a Chevrolet Tavera in simple and quick steps. First, lift the veh…
Replace the Climate Control Lights on the Chevrolet Tavera
Replace the Climate Control Lights on the Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) In this tutorial video, we will go over the main instructions that will allow us to disassemble and replace the bulbs for the climate control switche…
How to Replace the Coolant in a Chevrolet Tavera
How to Replace the Coolant in a Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) Follow this guide to replace the coolant in your Chevrolet Tavera in simple and quick steps. First, open the hood and start unscrewing the radiator c…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos