Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Climate Control Lights on the Chevrolet Tavera

Model: Chevrolet Tavera MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument panel light

Video tutorial

In this tutorial video, we will go over the main instructions that will allow us to disassemble and replace the bulbs for the climate control switches on the Chevrolet Tavera. First, get inside the vehicle and start by removing the central cover of the instrument panel.

Then, unscrew the screws securing the climate control switches using a Phillips screwdriver, as shown in the video. At this point, remove the small bulb lights from the climate control switches and replace them with new ones.

Finally, reassemble everything by following the reverse procedure of disassembly!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Oil and Oil Filter Replacement for the Chevrolet Tavera
Oil and Oil Filter Replacement for the Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) Today, we will go through the necessary guide for replacing the engine oil and oil filter while performing the routine maintenance service for the Ch…
How to Replace the Water Pump in a Chevrolet Tavera?
How to Replace the Water Pump in a Chevrolet Tavera?
Chevrolet Tavera (2001-2017 / MK 1) To replace the water pump in a Chevrolet Tavera, open the hood to access the components inside the engine compartment. At the front of the engine blo…
How to Replace the Timing Belt on the Chevrolet Tavera
How to Replace the Timing Belt on the Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) In the following video, we will see how to replace the timing belt on the Chevrolet Tavera. This component is very important as it precisely synchron…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos