Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Replacement for the Chevrolet Tavera

Model: Chevrolet Tavera MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

Video tutorial

Today, we will go through the necessary guide for replacing the engine oil and oil filter while performing the routine maintenance service for the Chevrolet Tavera. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine using a 17 mm socket wrench, allowing it to drain into a container for about ten minutes; then, unscrew the oil filter cartridge located next to it using the appropriate tool.

At this point, replace the oil filter and refill it with the new one by unscrewing the fill cap!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Chevrolet Tavera?
How to Change the Engine Oil on a Chevrolet Tavera?
Chevrolet Tavera (2001-2017 / MK 1) To change the engine oil on a Chevrolet Tavera, access the underside of the engine compartment where the oil drain plug is located. This will allow y…
How to Replace the Transmission Fluid in a Chevrolet Tavera
How to Replace the Transmission Fluid in a Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) This guide provides the necessary instructions to replace the transmission fluid in a Chevrolet Tavera in simple and quick steps. First, lift the veh…
How to Replace the Air Filter in a Chevrolet Tavera
How to Replace the Air Filter in a Chevrolet Tavera
Chevrolet Tavera (2001-2017 / MK 1) In today's video, you will learn how to remove the air filter in a Chevrolet Tavera. First, open the hood by pulling the lever located inside the veh…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos