Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Chevrolet Aveo?

Model: Chevrolet Aveo MK 2, T300 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Key

See other generations:
Video tutorial

To program the key of the Chevrolet Aveo, you need to insert the blank key into the corresponding ignition block: then you will need to connect a diagnostic tool to the OBD port of the vehicle located under the steering column. At this point, it will be possible to select the model of the car in question and its corresponding version: in this way, it will be possible to follow the instructions provided in the tutorial to ensure that the key is programmed.

You can finish by turning off the ignition and disconnecting the scanner.


Posted on 12 June 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Chevrolet Aveo
How to Replace the Spark Plugs on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Before you can start, open the front bonnet of your Chevrolet Aveo. Begin by disconnecting the leads connected to the spark plugs by simply pulling t…
Where to Find the Fuses in the Chevrolet Aveo
Where to Find the Fuses in the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / MK 2, T300) Follow this procedure to locate the fuse box in your Chevrolet Aveo. First, get into the car and take your seat in the driver's position. Next, focus…
How to Replace the Starter Motor on the Chevrolet Aveo
How to Replace the Starter Motor on the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) In this video, see how to remove and replace the starter motor on the Chevrolet Aveo, as well as the Matiz and Spark. First, lift the vehicle and ide…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos