Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Car stereo

To remove the car radio, first detach the plastic trim surrounding the radio itself, including the air vents, the instrument cluster trim, and the hazard light switch: use a small plastic lever to detach the trim and disconnect the power connector of the switch. Next, unscrew the fixing screws of the radio and the glove compartment below (located on the sides) and pull it out from its housing, disconnecting the relevant connectors. Ensure you have the activation code before proceeding with the removal.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Car Radio on a Chevrolet Matiz
Replacing the Car Radio on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Remove the entire large radio surround, which also houses the air vents, by pulling it off by hand with force (if it is too difficult, use a small fl…
Instructions for Removing the Wing Mirror on a Chevrolet Matiz
Instructions for Removing the Wing Mirror on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this video tutorial, learn how to remove the external wing mirror of a Chevrolet Matiz. First, remove the plastic cover located beneath the wing m…
Removing the Rear Bumper on Daewoo Matiz
Removing the Rear Bumper on Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) Removing the rear bumper on the Matiz is quite simple, so even for a minor touch-up, it is advisable to remove it rather than masking the entire car.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos