Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radio on a Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

Video tutorial

Remove the entire large radio surround, which also houses the air vents, by pulling it off by hand with force (if it is too difficult, use a small flat screwdriver or a plastic lever in the side gaps for assistance). At this point, with the surround removed, you can unscrew the screws securing the car radio that were previously covered.

This will allow you to extract the radio and disconnect the cables (one is for the antenna). Nothing could be easier! As you can see, this is a very simple operation that anyone can do. To fit the new piece, proceed in reverse.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Change the Timing Belt of the Chevrolet Matiz 800
How to Change the Timing Belt of the Chevrolet Matiz 800
Chevrolet Matiz (1998-2010 / MK 1) In this brief and simple guide, we will cover the main steps to replace the timing belt of the Chevrolet Matiz 800 cc. First, lift the vehicle and re…
How to Remove and Refit the Stereo on a Chevrolet Matiz
How to Remove and Refit the Stereo on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Let’s see how to remove and refit the stereo on a Chevrolet Matiz. First, use a plastic lever to detach the radio plastics and remove the trim from t…
How to Replace the Rear Wheel Bearing on a Chevrolet Matiz?
How to Replace the Rear Wheel Bearing on a Chevrolet Matiz?
Chevrolet Matiz (1998-2010 / MK 1) To replace the rear wheel bearing on the Chevrolet Matiz, lift the car so that the wheel securing bolts can be loosened. This will allow the wheel to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos