Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : How to disassemble and reassemble the stereo on a Chevrolet Matiz

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Air conditioning
Operation: How to disassemble and reassemble the stereo on a Chevrolet Matiz

Let's see how to disassemble and reassemble the stereo on a Chevrolet Matiz. First of all with a plastic lever we detach the plastic of the car radio and disassemble the frame on the dashboard, where there are the ventilation vents, then, with the help of a screwdriver we go to unscrew the tightening screws placed on the metal tabs on the sides of the stereo, extract it from the dashboard and disconnect the various power supply terminals located at the rear of the stereo and the antenna reception cable. We insert the new stereo in the seat with the attached adapter. Finally we test the new stereo mounted.


Posted on 29 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos