Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Wheel Bearing on the Chevrolet Enjoy

Model: Chevrolet Enjoy MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Bearing

Video tutorial

Today, you will see how to disassemble and replace the front wheel bearing on the Chevrolet Enjoy in this brief and simple guide. First, lift the vehicle and start removing the front wheel; then unscrew the bolts securing the front brake caliper using a socket or ratchet wrench, as shown in the video.

Next, remove the front brake rotor and then the bearing by unscrewing the central hub nut; finally, install the new front bearing by applying the reverse procedure!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Chevrolet Enjoy (2010-2022 / MK 1) To remove the front wheel bearing on a Chevrolet Enjoy, lift the vehicle with a jack so that the corresponding wheel is off the ground and can be rem…
Chevrolet Enjoy (2010-2022 / MK 1) To replace the front brake pads on a Chevrolet Enjoy, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once lifted, re…
Chevrolet Enjoy (2010-2022 / MK 1) To change the engine oil on the Chevrolet Enjoy, access the underside of the vehicle to unscrew the drain plug from the oil pan. Collect the used oil…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos