Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove Logos from a Chevrolet Bolt EV?

Model: Chevrolet Bolt Ev MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Manufacturer emblem

Video tutorial

In this video, you can see how to remove the badges, or manufacturer logos, from a Chevrolet Bolt EV. As shown in the first part, to remove the model name printed on the back of the vehicle, you need to heat it with a hairdryer for a few minutes and then pull it off using just your fingers.

The manufacturer logo, on the other hand, can be removed with the help of a plastic scraper.

Use it to pry off the logo, being careful not to damage the paint on the body. Finally, clean the car of adhesive residue with a suitable cleaning product.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Chevrolet Bolt Ev (2017-2024 / MK 1) In this video tutorial, you can see how to charge the Chevrolet Bolt EV. The Chevrolet Bolt EV has three types of chargers available. The cable comes…
Chevrolet Bolt Ev (2017-2024 / MK 1) In this guide, you will learn how to remove and replace the traction battery of the Chevrolet Bolt EV. First, raise the vehicle and start removing th…
Chevrolet Bolt Ev (2017-2024 / MK 1) In this video tutorial, you will see how to disassemble and replace the headlight bulb on the Chevrolet Bolt EV, following the instructions provided …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos