Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Bolt Ev
    4. : Replacement of the traction battery of the Chevrolet Bolt EV.

Chevrolet Bolt Ev - Video tutorial

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Part: Battery
Operation: Replacement of the traction battery of the Chevrolet Bolt EV.

In this guide, we will show you how to disassemble and replace the traction battery of the Chevrolet Bolt EV. First, we lift the vehicle and begin removing the various engine and battery protection panels by unscrewing all the screws. Then, we disconnect all the battery wiring and place a jack under the battery to lower it, as shown in the video. Next, we unscrew the battery bracket screws, remove them, and replace them with new ones, following the video tutorial until the end!


Posted on 24 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos