Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Bolt Ev
    4. : How to replace the battery on the Chevrolet Bolt Euv ?

Chevrolet Bolt Ev - Video tutorial

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Part: Battery
Operation: How to replace the battery on the Chevrolet Bolt Euv ?

If we need to replace the car battery, it is necessary to follow the instructions below: first of all, open the bonnet and locate the battery located on the left side of the engine compartment, first disconnect the negative pole clamp and then the positive one . Then proceed to unscrew the fixing nuts of the plate which blocks the battery. At this point it will be possible to extract the battery itself and replace it with the new one (first check that the new battery has the same power characteristics as the one we are going to replace). Finally, secure the locking plate again and reconnect the clamps, first the positive and then the negative.


Posted on 24 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos