Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Bolt Ev
    4. : How to replace the key battery on the Chevrolet Bolt Euv [WORLD]

Chevrolet Bolt Ev - Video tutorial

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Part: Key
Operation: How to replace the key battery on the Chevrolet Bolt Euv [WORLD]

In the event that when we go to open the car with the remote control key we are unable to open it or start it, the remote control battery is probably flat and needs to be replaced, we will see below how. First remove the emergency key from the remote control by pressing the small button on the side. With the same emergency key, pry open the two shells that make up the remote control itself, in this way we will have access to the compartment containing the battery, using a fingernail we can extract the battery from the compartment and replace it with the new one. Finally, close the lid of the remote control and lock it by pressing with your fingers.


Posted on 3 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos