Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Chevrolet Impala

Model: Chevrolet Impala MK 10 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Front bumper

See other generations:
Video tutorial

This guide will show the complete procedure for removing the front bumper on the latest Chevrolet Impala. Note that this procedure does not apply to earlier models of the Chevrolet Impala.

To perform this procedure, you will need several tools, including a 10mm socket wrench and a Torx T20 screwdriver. The Torx T20 screwdriver will be used to remove the plastic clips and secondary supports located at the front of the hood, where the top of the bumper begins.

Use the socket wrench with the 10mm extension to remove all screws and bolts at the bumper joints, located at the front of the undercarriage. To identify the specific screws, bolts, and any plastic clips to remove, refer to the demonstration video.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Chevrolet Impala
Replacing the Headlight Bulb of the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) Today, we will go through the steps and instructions to remove and replace the low beam bulb of the Chevrolet Impala's headlight. First, open the hoo…
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
How to Disassemble the External Fuse Box on the Chevrolet Impala
How to Disassemble the External Fuse Box on the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) Today's instructions will show you how to disassemble and replace the external fuse box on the Chevrolet Impala in simple steps. First, open the hood…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos