Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Chevrolet Sonic 1.4

Model: Chevrolet Sonic T300 - Years 2012-2020
Part: Spark plugs

This brief and simple guide shows how to remove and replace the engine spark plugs on the Chevrolet Sonic 1.4. First, open the hood and begin by removing the plastic cover located above the valve cover; unscrew the two screws underneath to remove the connectors, as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones (of the correct type and with the same thread); hand-tighten them and gently secure, following the video to the end!

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the Chevrolet Sonic
How to Replace the Cabin Air Filter in the Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) In this new mini guide for your Chevrolet Sonic (2012-2020), we will describe step by step all the necessary steps to correctly complete the replacem…
How to Replace the Headlight Bulb on a Chevrolet Sonic
How to Replace the Headlight Bulb on a Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) The procedure to correctly replace the headlight bulb on your Chevrolet Sonic is fortunately very simple. With the following guide, you can complete …
How to Replace the Cabin Air Filter on a Chevrolet Sonic?
How to Replace the Cabin Air Filter on a Chevrolet Sonic?
Chevrolet Sonic (2012-2020 / T300) To replace the cabin air filter on a Chevrolet Sonic, open the glove compartment located on the passenger side to release the internal securing clips…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos