Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Chevrolet Cruze.

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Spark plugs

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to remove and replace the spark plugs of the Chevrolet Cruze. First, let's open the hood of the vehicle and begin by removing the upper engine cover; then we will unscrew the two screws securing the spark plug coil connector, disconnecting the connector located on the side, as shown in the video.

At this point, we will use a socket wrench with an extension to unscrew and remove all the spark plugs, replacing them with new original ones; we will hand-tighten them and gently tighten with the wrench, then reattach the spark plug connectors to the coils.


Posted on 28 November 2025 by ScegliAuto


Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Remove the Radio from a Chevrolet Cruze
How to Remove the Radio from a Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) If the factory radio in your Chevrolet Cruze is faulty and you want to replace it with a new one, read this guide and follow the steps to easily remo…
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos