Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Chevrolet Equinox 1.5L

Model: Chevrolet Equinox MK 3 - Years 2018-2025
Part: Spark plugs

The instructions in this guide will show us how to disassemble and replace the spark plugs of the Chevrolet Equinox 1.5L. First, we open the hood of the car and start removing the upper plastic cover of the engine; then we proceed to unscrew the fixing screws of the spark plug coils, using a socket wrench, as shown in the video. At this point, it will be possible to unscrew and remove the spark plugs, replacing them with new original ones; we screw them in by hand and then tighten them with the correct torque, finally connecting the spark plug coils!

Posted on 16 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs on a Chevrolet Equinox?
How to Replace Spark Plugs on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the spark plugs on a Chevrolet Equinox, open the hood to remove the cover from the top of the engine block. Once the cover is removed, dis…
How to Replace Spark Plugs on a Chevrolet Equinox?
How to Replace Spark Plugs on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the spark plugs on a Chevrolet Equinox, open the hood to access the internal components of the engine compartment. Next, loosen the side b…
How to Replace the Starter Motor in a Chevrolet Equinox
How to Replace the Starter Motor in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, discover how to disassemble and replace the starter motor in a Chevrolet Equinox. First, open the hood of your vehicle and disconnect …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos