Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Spark plugs

To replace the spark plugs on a Chevrolet Equinox, open the hood to remove the cover from the top of the engine block. Once the cover is removed, disconnect the connectors attached to the coils so that they can be pulled out of their housings. After removing the coils, you can then pull out the spark plugs underneath using a spark plug socket. This way, you can install the new replacement parts and reassemble all the components that were removed.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the Chevrolet Equinox 1.5L
How to replace the spark plugs of the Chevrolet Equinox 1.5L
Chevrolet Equinox (2018-2025 / MK 3) The instructions in this guide will show us how to disassemble and replace the spark plugs of the Chevrolet Equinox 1.5L. First, we open the hood of …
How to Replace Spark Plugs on a Chevrolet Equinox?
How to Replace Spark Plugs on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the spark plugs on a Chevrolet Equinox, open the hood to access the internal components of the engine compartment. Next, loosen the side b…
How to Replace the Starter Motor in a Chevrolet Equinox
How to Replace the Starter Motor in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, discover how to disassemble and replace the starter motor in a Chevrolet Equinox. First, open the hood of your vehicle and disconnect …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos