Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Chevrolet Equinox

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Windshield wipers

To replace the windshield wiper blades on a Chevrolet Equinox, lift the wiper arms so that they are not in direct contact with the windshield. Next, detach the mounting pins that connect the arms to the blades by pulling the blades down. Once the old blades are removed, insert the new ones and secure them with the corresponding latches. After the new blades are installed, position them against the windshield to verify they function correctly.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wipers on the Chevrolet Equinox 2
How to Replace the Front Wipers on the Chevrolet Equinox 2
Chevrolet Equinox (2010-2017 / MK 2) Follow this step-by-step guide to remove and replace the front wipers on the second generation Chevrolet Equinox. First, move to the front of your ve…
Where is the rear windshield wiper fuse located in the Chevrolet Equinox?
Where is the rear windshield wiper fuse located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) If the rear windshield wiper of our Chevrolet Equinox has suddenly stopped working, we can first check the status of the corresponding fuse, whose lo…
How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?
How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the rear windshield wiper blade on a Chevrolet Equinox, loosen the internal clips that secure the plastic cover along the entire rear wind…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos