Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the rear wiper fuse located in the Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

If the rear wiper of your Chevrolet Equinox has suddenly stopped working, you can first check the status of the corresponding fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, beneath the black plastic cover on the driver's side.

It is labeled F30 and is 20A. If blown, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off, otherwise you could damage the wiper motor.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Chevrolet Equinox 2
How to Replace the Front Wipers on the Chevrolet Equinox 2
Chevrolet Equinox (2010-2017 / MK 2) Follow this step-by-step guide to remove and replace the front wipers on the second generation Chevrolet Equinox. First, move to the front of your ve…
How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?
How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the rear windshield wiper blade on a Chevrolet Equinox, loosen the internal clips that secure the plastic cover along the entire rear wind…
How to Replace the Windshield Wiper Blades on a Chevrolet Equinox
How to Replace the Windshield Wiper Blades on a Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) To replace the windshield wiper blades on a Chevrolet Equinox, lift the wiper arms so that they are not in direct contact with the windshield. Next, …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos