Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

To replace the rear windshield wiper blade on a Chevrolet Equinox, loosen the internal clips that secure the plastic cover along the entire rear window. Once the cover is removed, detach the wiper blade from its arm by releasing its mounting pin. After removing the old blade, install the new one by securing it with its hook.

Once the installation is complete, cover everything by reinserting the plastic cover.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Where is the rear wiper fuse located in the Chevrolet Equinox?
Where is the rear wiper fuse located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) If the rear wiper of your Chevrolet Equinox has suddenly stopped working, you can first check the status of the corresponding fuse, the location of w…
How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the rear headlight bulb on a Chevrolet Equinox, open the trunk to access the screws located between the headlight and the seal. After loos…
How to replace the rear taillight bulbs of the Chevrolet Equinox.
How to replace the rear taillight bulbs of the Chevrolet Equinox.
Chevrolet Equinox (2010-2017 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear light bulbs of the Chevrolet Equinox. First, let's open the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos