Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Light bulb

To replace the rear headlight bulb on a Chevrolet Equinox, open the trunk to access the screws located between the headlight and the seal. After loosening the screws, you can pull the headlight out of its housing and access the back. Here, you can remove the old bulbs and replace them with new ones. After the replacement, reconnect the headlight to its connector and secure it back in the housing with the appropriate screws.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the License Plate Bulb on a Chevrolet Equinox?
How to Replace the License Plate Bulb on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the license plate bulb on a Chevrolet Equinox, use a lever tool to pry the light assembly above the license plate from its housing. Once r…
How to Replace the Headlight Bulb on the Chevrolet Equinox
How to Replace the Headlight Bulb on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. On…
How to Replace the Tail Lights on a Chevrolet Equinox?
How to Replace the Tail Lights on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this video, see how to remove the tail lights from a Chevrolet Equinox, a task to perform if you need to replace a burnt-out bulb or the light its…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos