Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on a Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to remove and replace the headlights on a Chevrolet Equinox, following the instructions below. First, open the hood and start by removing the plastic cover located on top of the bumper; then, unscrew the additional screws found on both sides of the front wheel wells until you remove the bumper, as shown in the video.

At this point, disconnect the electrical connector for the bulbs and unscrew the screws for the headlights until you completely remove them; then reinstall the headlight assemblies!


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Know the Fuse Diagram of a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This video tutorial shows the fuse diagrams for a Chevrolet Equinox. The box located inside the engine compartment has fuses assigned to: ventilation…
How to Replace the Front Bumper on the Chevrolet Equinox
How to Replace the Front Bumper on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Today, we will see in this video tutorial the instructions to remove and replace the front bumper on the Chevrolet Equinox. First, remove the front l…
How to Replace the Tail Lights on a Chevrolet Equinox?
How to Replace the Tail Lights on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this video, see how to remove the tail lights from a Chevrolet Equinox, a task to perform if you need to replace a burnt-out bulb or the light its…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos