Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight from a Chevrolet Equinox?

Model: Chevrolet Equinox MK 1 - Years: 2005, 2006, 2007, 2008, 2009
Part: Headlight

See other generations:
Video tutorial

To remove the headlight from a Chevrolet Equinox, pry at the bottom of the front trim piece to detach it. Once this trim is removed, open the hood to access the screws that secure the headlight from the top. Loosen these screws so you can slide the headlight out of its housing.

After disconnecting the connectors at the back, you can completely remove the headlight from its socket and install a new one.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Chevrolet Equinox
How to Replace the Headlight Bulb on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. On…
How to Replace the Headlights on a Chevrolet Equinox
How to Replace the Headlights on a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this brief and simple guide, you will learn how to remove and replace the headlights on a Chevrolet Equinox, following the instructions below. Fir…
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the outside rearview mirror on a Chevrolet Equinox, first remove the door panel by loosening the bolt located at the internal handle. Once…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos